![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
PJ Sweeney:
|     |
UNIQUE, INTERESTING AND FABULOUS PARTZBy Professional Artists. Because your project can only be as unique as the materials you use.
INDEX
FACES AND SO MUCH MORE
Funky Polymer Clay Face Beads, perfect for Jewelry, Dolls, Journals and more! One size, ready for beading and edging. These sunfaces, cast from an old wood carving of a smiling sunface (and touched up a bit in the process), are great bases upon which to start a project. They have a hole top to bottom through the edge of the 1/4 to 1/2" thick surface, which will allow wire up to about 20 gauge to go through. We have many versions and colors available including one with full rays... The edges have been sanded and on some a hole has also been made from left to right, not all the way though, but just deep enough you can put an eyepin to anchor any beadwork you are doing around the permimeter. Sun/Moonface bead cost is $5.50 each or 6 for $30 plus shipping. View current color palette in popup window We have "pearl kitz" for those who want to make their own pearl framed moonfaces. They contain about 15-20 dyed freshwater pearls in a color mix to compliment your moonface purchase. You also get about 4" of 20 gauge wire and the complete directions on how to make one yourself. We are now adding seed beads, beading wire and 2 bead caps to the original pearl kit. The total amount for that, including moonface comes to $14.00.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
NEW!! Introducing the "torso bead". Shown in copper, the colors range from copper, to peach to gray. The 1 3/4" long torso has a vertical hole from neck to base, eyepins at legs and arms. Can be ordered with pin back. Review details |
|||
|
Cameo Noveau a beautiful faux cameo made from Polymer Clay. Marvelously detailed and 1 1/2" in diameter, this beauty comes in a variety of colors. We've got pearl white, pink pearl and what is pictured is Fimo's color "Rose Quartz" with an interference red pearl-ex powder dusted on to bring up the detail. These are not finished with a gloss, as we feel that takes away the cameo look. Imagine this nested in the center of a black victorian lace collar! | |||
![]() |
We also offer the "Coin
Cameo" as she resembles the face of a coin. She's not
more than 1/8" thick, and upon request, a center hole can be put in.
Other colors in the pastel range are also available.
|
|||
|
A nicely proportioned classical moon or sunface, perfect for all celestial occasions. "Face that goes anywhere" They are available in a variety of colors and holes vertically or horizontally. 1" diameter. Review other samples |
|||
|
Celestial beings have moods, too! Just like comedy and tragedy, we've got Smirky and Pouty They are available in a variety of colors and holes are vertical. You get a mix of the two. Between 3/4" and 7/8" Review sizing, colors, other samples |
|||
|
A totally stately head (2" high) has eyes closed and looks like the Cheshire Cat! "The Content Moon" Available in a variety of solids and subtle patterns as well as the option of making it a badge holder! Review sizing, colors, other samples of the Content Moon |
|||
|
Totally different, this "Crescent Moon" is really fun! The entire crescent is 3 1/4" high and about 2" wide, and packs a punch! The hole is horizonta, right above the eyebrow, so it can be strung as a simple pendant, or beaded with stars and a whole galaxy of planets. Great fun! Review sizing, colors, other samples of the Crescent Moon |
|||
|
BRAND NEW! So fun and part of my celestial collection a Sulky Sunface with poochy cheeks and thick lidded eyes this sunface has been out playing with the moon all night! 1 3/4" in diameter, the hole is through the center. This sunface can easily be made into a badge holder (see our new Badge Holder series) as well as a fabulous pendant or embellishment. |
|||
|
The Sleeping
Moon is beautiful, serene and small enough for a variety of
interesting projects. We love them for small pendants, hat pins, and
collaging. |
|||
Critter (cat, dragon, butterfly) |
||||
|
Make your own winged beauty! I'm calling it a dragonfly, but you can call it anything you'd like! Polymer clay wings and body are 4 1/4" wide, the hole runs vertically for you to dangle bead bodies, and the 20 gauge wire "antennae" make the total hight closer to 2". All of them are finished with a shimmery mica finish and are somewhat translucent. (which makes them difficult to photograph) The colors range from light purple, peach and pale green to light blue and some indetermine shimmery colors. Review the variety of colors, and see a completed one. |
|||
|
Queen Kittys bring royalty and pride to your cat projects. Holes drilled from top to bottom, with wire whiskers, fun, with almond shaped clay eyes, and a touch of gold or silver on their crown. Check them out. Perfect for pendants, earrings and hand cast. |
|||
|
Kitty Faces are purrfect! . They're fun, have small clay eyes, vertical hole and are about the size of a dime. Hand cast, no two the same. Look at a group of them. Calico, copper, gray, white... each has its own personality. |
|||
|
They're unique, handmade, and shimmer with powdered mica, these
polymer clay dragon "fossils" are ready to incorporate into your
pendants, pins and and more to give a totally new look. You get
a subtle, but dramatic look with these 2" dia. handmade beauties.
Perfect for focal bead or unique collage element. |
|||
|
Much like the imperial dragon, this flowing dragon has a art
noveau feel to it. Details brought out with mica touches, and offering
a horizontal or vertical drill. This beauty is nicely detailed.
Check
them out. Perfect for focal bead or unique collage element. |
|||
|
Not your typical eastern dragon, this one has more of a celtic
spirit... maybe a griffin? This beauty is nicely detailed. Check
them out. Perfect for focal bead or unique collage element. |
|||
|
Fun, unique and interesting, the "Lizard/Dragon Head" boasts big pearl white eyes with litle black pupils, black "eyeliner" for emphasis, and black nostrils at the end of its snout. Fully sculpted, this head has no specific orientation. The hole is from the back of the head to the end of the snout. Available in a variety of color families. Review sizing, colors, other samples |
|||
Goddess/Decorative |
||||
|
BRAND NEW!! The Blossom Headed Woman. Hand cast out of polymer clay, this 1 3/4" dia face is beautifully covered with a dimensional flower & petals! She's got glass bead eyes, vertically drilled and is a bit less than 1/2' thick. Available in pastel colors, and delicately hand accented with mica powders prior to baking. Review the size, color choices and see more samples for the "Blossom Face" |
|||
|
The Buddha or Modest Goddess Face. Hand cast out of polymer clay, this 1 3/4" high 1" wide balinese-style goddess face has a lot of charm and possibility! Available in many colors, and delicately accented with mica powders. Has flat back and is available with single vertical or horizontal hole. Goddess face: $5.00 each, or 3 for $13.50. Review the size, color choices and see more samples for the "Modest Goddess Face" |
|||
|
Seen our "Nymph
Head?" Standard configuration: Standard configuration $6.00 each, $1 extra for pin back. Head with Hair kit $15.00 (order by hair color) Size, color choices, hair kit details and see more samples for the "Nymph Face" |
|||
|
A cutely pouting and well-detaied face, perfect for everythig. occasions. "Pouting Face " They are available in a variety of colors and holes vertically or horizontally. Review sizing, colors, other samples of this cute face |
|||
|
Demure but stately head (2" high) has her eyes closed and a wonderful Mona Lisa smile. "I'm calling it the Demure Head" Available in a variety of solids and subtle patterns as well as the option of making it a badge holder! Review sizing, colors, other samples of the Demure Head |
|||
|
Art Deco? Wonderful mysterious fashionable Feather-Hat Woman is a treat. Featuring glass bead eyes, hand painted (before firing) "feathers" and highlights, she looks ready for a night on the town. She's got a vertical hole from "v" top to bottom. She's about 2" high. She can easily be made into a badge holder (see our new Badge Holder series) Face: $6.50 each, 3 for $18 |
|||
|
.Totally unique this is a Mardigras Celebration Face (part of the comedy/tradegy theatre pantheon) She's got a vertical hole from "v" of her top crown and out the bottom of her chin. She's about 2" high. For die hard Mardi Gras celebrators, she can easily be made into a badge holder (see our new Badge Holder series) Face: $4.00 each, or 4 for $15.00. |
|||
|
Smiling nymph-like in a nest of grapes and leaves, the "Harvest Girl Head" is beautifully tinted with pearl-ex mica powders in green, purple, pink, copper and gold. Available in a variety of solids it is 3" high and the hole for stringing is horizontal and 1/4 inch down from the top so it makes a wonderful pendant! Review sizing, colors, other samples of the Harvest Girl |
|||
Flower/Fantasy |
||||
![]()
|
Hand cast out of polymer clay, these beautiful dragonfly and butterfly hearts are hand-detailed with Pearl-Ex powders before firing to bring up the exquisite detail of the casting. Offered in rose, purple, pearl, teal, blue, black, silver and copper.
Review colors, sizing more details on the Butterfly Hearts and Dragonfly
Hearts. |
|||
|
Make a lovely flower necklace with these beautiful flower beads. Hand cast out of polymer clay, this bouquet of pansies, daisys, daffodils, petunias all have horizontal hole for stringing on cord. Sold in groups of 4, color families: reds, blues, purples, pastels. Review colors, sizing more details on the Mini Flowers. |
|||
|
Make a lovely flower necklace with these beautiful flower beads. Hand cast out of polymer clay, this 1" dia. flower is beautifully shimmering by delicately hand accenting with mica powders.The trumpet-like shape gives us the perfect place for drilling the hole--horizontally, halfway down the stem, making it hang perfectly.
Review colors, sizing more details on the Hybrid Hibiscus. |
|||
![]() |
HYBRID HIBISCUS NECKLACE KIT |
|||
Tribal (assorted 4 tribal masks $12 ) |
||||
A"Fierce Face Mask", this 1" high rough-cut mask has a trace of pacific island to its look. Add tinting with mica powders to bring out the accents and its fabulous. With a vertical hole and almost a 1/2" thick, he's a real serious addition to any tribal look necklace. Review colors, sizing, and other samples. |
I call him "The Chief" and he looks very regal with a crown-like head and a nicely cut beard. With a horizontal hole through the top third and measuring about 1 3/4" high, he's a real serious addition to an interesting necklace. Review colors, sizing, and other samples. |
|||
|
Two more unique "ethnic masks". Mask 3 has the effect of cut bone, is about 1" high and enhanced with powder. They can be ordered with hole top to bottom or side to side, and they come in both mixed colors and solids. CLICK ON EITHER PHOTO TO SEE MORE IMAGES AND PRICING Mask 2 is incredibly detailed, has the effect of cast bronze or copper, is about 1 1/4" high, has a deep profile and eye sockets are enhanced with powder. They can be ordered with hole top to bottom or side to side, and they come in both mixed colors and solids. |
|||
Everything Else |
||||
|
Make your own crowd! A potpourri of heads of various types and styles. Perfect for decorating a small piece of jewelry or as funky earrings! "Small Head Bonanza" Avalable in assorted colors only and priced for experimentation! Review colors, sizing more details on the small head bonanza. |
|||
Click here to review a list of testimonials from just a few of our many customers who have been purchasing from us since 1999.
LIKE FACES? CHECK OUT OUR "FACE"
WATCH FACES! The faces in stock (all are ladies 18K gold
plated bezel) are on http://www.pjewelry.com/watchfaces.html
These faces can be ordered in polished chrome, ladies and mens.
Home    Back to Previous Page     About NotJustPartz/Contact Info